Skip to content
ATLAS What will my project cost?
FREN

Free calculator, no sign-up

Tile calculator

The area, the tile size, the layout pattern — and the number of boxes to put in your cart.

Step 1 of 4 The room

What area will you cover?

Measure the room with a tape measure, wall to wall.

Room length
ft
in
Room width
ft
in

What tile size?

It’s printed on the box, in inches.

How will it be laid?

The pattern determines the cutting waste.

sq ft
Printed at the bottom of the box label.

Quantities are free here, forever. Retailer and regional pricing, grants and export are waiting for you in the paid plans.

See the plans

Good to know

What to check

Waste depends on the pattern, not on chance

  • A straight lay wastes about 10% of the tiles in cuts. A brick-style offset rises to 12%, because every row starts with a cut piece. A diagonal lay reaches 18%: every tile around the perimeter is cut at an angle and the offcuts are larger. ATLAS applies the right percentage for your choice.

The minimum grout joint is a standard, not a matter of taste

  • The ANSI A108.02 standard prohibits a joint narrower than 1/16 in., whatever the manufacturer promises. Tiles have a dimensional tolerance, and a joint that is too thin can’t absorb it. Also allow a movement gap of about 1/4 in. against walls and thresholds (TCNA EJ171): the floor moves, so the tile has to be able to move too.

Large formats: watch the offset

  • With a tile more than 15 in. on a side, a brick-style offset should not exceed one third of the length. Beyond that, the tile’s natural warp makes the centre stand proud of its neighbours, and the joint becomes uneven — a defect known as lippage. The same standard then widens the joint: on average at least 1/8 in. for a rectified tile, 3/16 in. for a calibrated tile. Always keep a full box in reserve: a replacement lot will never match the shade exactly.

The other free calculators